Tool Steel Supplier

Alloy steel can be used in a wide variety of applications because there are so many different combinations of alloying elements that achieve different properties. With such a wide variety of alloying elements and combinations, choosing an alloy steel grade can be difficult. This article will explain some considerations when choosing an alloy steel for your next project. 7 things you should consider when choosing an alloy steel grade include: Does it need to have good formability? Does it need to be welded? Does it need to be machined? Does it need to have corrosion resistance? Does it need to be heat treated? What strengths are required? What are the typical applications? Does the alloy steel need to have good formability? Some elements, such as chromium and boron, increase the steel’s hardenability. Since most alloy steels are able to be hardened, forming is typically done in the annealed state of the material. Alloy steels that are annealed and have lower amou...

What is Cold Work Tool Steel? & What is Hot Work Tool Steel? Cold Work Tool Steel Cold work tool steel basically is high carbon steel, the alloy content contains tungsten, manganese, chromium and molybdenum relatively low alloy steel. These alloys added to improve hardenability, allowing less distortion than the W series of quenching oil. These are relatively cheap steel, high carbon content they will produce sufficient wear resistance, used for short-term operation. It is used for all types of blanking and forming dies, gauges, fixtures, etc. In ASTM Steel standard Cold Work Tool Steel main include the “W” (Water Hardening), “O”(Oil Hardening), “A” (Medium Alloy Air Hardening), “D” (High Carbon, High Chromium) Tool Steel Series. Typical Steel Grade like: W1, W2, W5 tool Steel; O1, O2, O6, O7 Oil Steel; A2, A4, A6,A7,A8, A9,A10, A11 Cold work Steel; D2,D3, D4,D5,D7 Steel; etc. Hot Work Tool Steel Hot working tool steel to make iron and nonferrous metals as well as hot for...

Fasteners are often made of steel, but there are many different types of steel. Here are the steels most commonly used for fasteners: Alloy steels: Steels alloyed with molybdenum, nickel, and chromium (AISI 4037, 4130, 8630) are best if strength is required. These steels also have good cold-forming properties when annealed and can be heat-treated for the best combination of strength, toughness, and shock resistance. Carbon steels: Fine-grain, fully killed (i.e., completely deoxidized) basic steel with no alloying agent. Low-carbon steels have from 0.06 to 0.22% carbon content (AISI 1008, 1010, 1018, and 1022) and exhibit good ductility for cold-forming. Medium-carbon steels contain 0.30 to 0.50% carbon content (AISI 1038, 1045) and are stronger but less ductile. These steels respond well to quench and temper. High-carbon steels contain 0.50% or more carbon (AISI 1066, 1095). They are difficult to cold-form unless annealed. They do, however, have high strength and can be heat-tre...

Basic properties that cutting must posses are: Tool material must be at least 30 to 50% harder than the work piece material. Tool material must have high hot hardness temperature. High toughness High wear resistance High thermal conductivity Lower  coefficient of friction Easiness in fabrication and cheap Different elements used in cutting tool materials and their properties are Element Properties Tungsten Increases hot hardness Hard carbides formed Abrasion resistance Molybdenum Increases hot hardness Hard carbides formed Improving resistance Chromium Depth hardenability during heat treat hard carbides are formed improving abrasion resistance some corrosion resistance Vanadium combines with carbon for wear resistance retards grain growth for better toughness Cobalt Increases hot hardness, toughness Carbon Hardening element forms carbides Different cutting tool materials used for cutting operations in practice are high carbon steel, high speed steel, non -f...